All Devices
AdditionalDevices_FournisseurLeftAvailable Feed Wheel on the Left Present
BubbleHelp_FournisseurLeftAvailable Release or lock feed wheel.
|
|
Release or lock feed wheel |
Feed Wheel on the Left PresentAdditionalDevices_FournisseurRightAvailable Feed Wheel on the Right Present
BubbleHelp_FournisseurRightAvailable Release or lock feed wheel.
|
|
Release or lock feed wheel |
Feed Wheel on the Right PresentAdditionalDevices_ClampCutPointsLeft Quantity of Clamping and Cutting Points on the Left
BubbleHelp_ClampCutPointsLeft Set how many clamping/cutting points are present on the clamping and cutting bed.
|
|
After a machine conversion, inform the control unit about how many clamping/cutting points are available. (6, 8, 16, 16/8) |
|
16/8 = With a 16 times clamping and cutting bed, only every second clamping position is used (1, 3, 5, etc.). Use this setting with a double bow plating yarn carrier so that both yarns can be clamped and cut securely.
|
Quantity of Clamping and Cutting Points on the Left
AdditionalDevices_ClampCutPointsRight Quantity of Clamping and Cutting Points on the Right
BubbleHelp_ClampCutPointsRight Set how many clamping/cutting points are present on the clamping and cutting bed.
|
|
After a machine conversion, inform the control unit about how many clamping/cutting points are available (6, 8, 16, 16/8). |
|
16/8 = With a 16 times clamping and cutting bed, only every second clamping position is used (1, 3, 5, etc.). Use this setting with a double bow plating yarn carrier so that both yarns can be clamped and cut securely.
|
Common_YLC YLC
AdditionalDevices_Available Available
BubbleHelp_YLCAvailable For information: The YLC device is present on the machine.
|
|
The YLC device is present on the machine. |
YLC PresentAuxTakeDown Auxiliary Take-down
AdditionalDevices_Available Available
BubbleHelp_AuxTakeDownAvailable For information: The auxiliary take-down is present on the machine.
|
|
The auxiliary take-down is present on the machine. |
Auxiliary take-down availableLubrication Central Lubrication
BubbleHelp_LubricationAutomaticOnOff Activate the central lubrication.
|
|
Activate Automatic Lubricating.
|
Automatic Lubricating
If the central lubrication is switched off you must lubricate the needle bed and jack bed manually.IntarsiaYarnCarrierType_Type2 Yarn Carrier Drive Type 2
BubbleHelp_IntarsiaYarnCarrierTypes Set which type of yarn carrier drive is available.
|
|
After a machine conversion, inform the control unit which yarn carrier drive type is available. |
Yarn Carrier Drive Type|
Storage Feed Wheel |
Fragment for testing whether the metadata functions |
|
Belt Take-down |
Fragment for testing whether the metadata functions |
|
Additional needle bed left-right |
Fragment for testing whether the metadata functions |
|
Additional needle bed front-rear |
Fragment for testing whether the metadata functions |
