Prepare Machine

Yarn carrier home position, information on how to thread up the yarn carrier

Graphical overview over the yarn carrier home position

 

Switch on or off yarn carrier plunger.

switch off = all plungers

switch on = only the active plungers

Not with ADF!

Opens the dialog box in order to enter the braking values for the yarn carriers.

Not with ADF!

Move the selected yarn carriers horizontally and vertically.

Opens tabular yarn carrier overview.

Opens the Setup Editor.

Opens the dialog box in order to modify the counters.

Counters

Displays further information about the yarn carrier

For doing this, tap on the yarn carrier. The icon changes from to .

The following information is displayed:

1

Position of the yarn carrier in the clamping and cutting bed

2

Braking value of the yarn carrier

3

Information about the yarn feeding.
You enter the information on the pattern preparation unit.

  • Threading-up the thread from the left or the right into the yarn carrier
  • Threading-up yarn via the feed wheel
  • Threading-up yarn via the measuring wheel at the YLC device
  • Yarn name

It continues with the section "Set up pattern"