Updating Software - Indirect Installation

Indirect Installation:

No data is overwritten when copying the operating system.

Prepare the indirect installation:

  1. You are signed in as Senior Operator .
  2. The machine is producing.
    1
    In the main navigation bar switch to Configure Machine.
    2
    Select System Settings in the bottom navigation bar.
    3
    Open the Data Transfer tab.

1

Selection menu for the data type for data transfer

2

Selection of the external location regarding the source directory

  • F:\ [USB]
  • Network Drive

3

Button to perform the data transfer Import

4

Deletion of the provided operating system

 

    4
    Open the menu under Select data type.
    5
    In the selection menu, select the Operating system.
    6
    Under External Save Location select the desired source directory of the operating system.

The operating system may not be saved as a zip file in the selected source directory. Always save the operating system as extracted file.

    7
    Press the Import data button.
  1. The operating system to be installed is displayed and installed when the machine is switched off the next time.
  2. 8
    More in the chapter Reference runs.

If an operating system was loaded for indirect installation, no function key may be pressed in the System Control Unit window!