Intervene Manually I

Giảm tốc độ

The speed is reduced.
(Default: 70% of the production speed)

Production status: yellow (no optimal production)

So that you can see immediately that no optimal production is possible with this setting, the color of the information area changes from green to yellow.

Changing the reduced speed:
Cấu hình máy -> Hoạt động Cài đặt -> Xe

Khởi động lại vật dệt

Cancels the current fabric, and starts a new one of the current position (knitting program).
For example, when the fabric is defective.

The machine automatically begins with a new fabric.

Từ dòng

You will be asked, at which row the knitting program is to be started. The machine automatically begins with a new fabric.

This function is only active if the order consists of one knitting program.

Delete all yarn carrier positions.

Example:

The fabric piece is defective and you stop the carriage. In order to remedy the error you push the yarn carriers outward into clamping position and clamp the threads manually.

Before restarting the fabric piece you should know the following details:

If the yarn carrier positions are not deleted

• For the machine it is clear that the yarn carriers are still in the needle bed. (The yarn carriers were manually parked outward by you and the threads were clamped manually as well.)
• When starting the new fabric piece, the machine will bring the yarn carriers into their home position in the clamping points.
• The machine opens the corresponding clamp in the clamping and cutting bed and the manually clamped thread is released, i.e. unthreaded.
  And that is annoying.

The yarn carrier positions are deleted

• To avoid the unthreading, tap the Xóa bỏ tất cả các vị trí thiết bị dẫn sợi button.
• This way, the machine knows that all the yarn carriers are located in their clamping points.

Móc lên sau khi rớt xuống từ hàng

Opens the dialog box to enter the Sintral line number where picking-up after pressing-off starts from.

Conditions for this function:

• The order consists of one knitting program
• Machine without comb take-down
• Machine with comb take-down but without use of comb

Móc lên sau khi rớt xuống (#90)

Chiều mở rộng

Chiều xe sẽ được kéo dài theo cài đặt tùy chọn.

If you tap on the icon , you can select one of the following options:

• Xe ngoài giường kim
  The carriage moves all over the entire needle bed width.
  For example, for threading-up the yarn carriers - stop the carriage at an appropriate position, so that it is easier for you to thread-up the yarn carriers.
• Xe, 2 inch ở ngoài biên vật dệt
  The carriage always moves 2 inches beyond the fabric selvedge.
  For example, when you set-up an order, you will have a better view onto the fabric selvedge and the yarn carrier stopping positions.

Production status: yellow (no optimal production)

So that you can see immediately that no optimal production is possible with this setting, the color of the information area changes from green to yellow.

Khởi động vật dệt tự động

The machine automatically begins with a new fabric if the following conditions are met:

1. Racking located on home position
2. Yarn carriers located at starting position
3. Carriage direction allows new start

As long as these conditions are not met, cycles (RBEG...REND) will only be knitted once.

Lựa chọn kim

Switch the needle selection on or off.

For example, when a needle is broken and the carriage is therefore blocked.

Hủy bỏ sản xuất

The production of the current order is cancelled.

Starting with the next Reversal, the carriage moves back and forth without knitting (empty row).

For example if you want to exit the production to:

• carry out major maintenance works
• load a new operating system

Cancel Production and Start Order Again

Tạo trạng thái ban đầu

With the function Tạo trạng thái ban đầu there are carried-out the following steps:

• The yarn carriers are taken to the home position, clamped and cut in the clamping and cutting bed
• The fabric is cast-off (the new fabric is started again with "empty needles")
• The needle bed is taken to the home position (V0)

Attention :

If you need to carry out a different work procedure for the restart of a fabric, e.g. when working without comb take-down, we recommend not to use the function Tạo trạng thái ban đầu.

Return the machine to the initial state.

With this, the individual aggregates (carriage, yarn carriers, racking,...) are brought to a defined state step by step.

When the steps are processed, the initial state is created and the machine is ready to knit.

Afterwards you can:

• start a new fabric (continue the production)
• create a new order
• start a new order

Create Initial State

Sữa chữa dòng

This function is only active if the order consists of one knitting program.

You are signed in as Bảo trì (or higher).

The selected line will be repeated continuously until you restart the knitting program.

When carrying out cleaning, adjustments and repair work, it is helpful if a certain knitting situation (line) can be set-up immediately and repeated as often as needed.

Dừng máy

Stopping of the machine when the set condition is fulfilled (conditional stop).

If you tap on the button, you can select one of the following options:

• Ở đảo ngược kế tiếp
  Stop machine in next carriage reversal.
• Khi nào vật dệt hiện tại đã hoàn thành
  Stop machine when the current fabric is completed.
• Sau khi lượt chạy
  Stop the machine when the set number of run-through has been reached.
• Trong vài phút
  Stop the machine when the remaining running time has expired.
• Ở dòng Sintral
  Stop the machine if the set Sintral line has been reached.
• Ở dòng Jacquard
  Stop the machine when the set Jacquard line has been reached.
• Bộ đếm
  Stop the machine when the counter has reached the set value.
• Ở bộ đếm chu kỳ
  Stop the machine when the cycle counter has reached the set value.

So that you can see immediately that a conditional stop is activate, the word STOP is displayed in the status bar.

Hút bụi

Switch fluff absorption on or off.

The needle beds in the knitting area are vacuumed off with the fluff absorption automatically.

If you tap on the icon , you can select one of the following options:

• Khoảng thời gian
  Periodic switch on and off of the suction device.
• Dài hạn
  The suction device is always switched on.