Intervene Manually II

Cleaning the touch screen

To prevent menus and function keys from being activated when cleaning the touch screen, tap the Cleaning touch screen button. The touch screen will be blocked for 15 seconds. If this period is not enough, tap the button again.


Use a clean, soft cloth for cleaning.
If heavy soiling is present, use a cleaning agent suitable for acrylic glass.

Gởi tin nhắn

Opens the dialog box to send a message to the Senior Operator or the maintenance staff.

PPS – Send message

Khởi động ngắn bánh xe cấp liệu bên trái

Friction feed wheel

Tap here to run the feed wheel for a short time, for example to make the thread-up easier. After 60 seconds, the function is automatically deactivated.

The feed wheel is switched on.

The feed wheel is switched off.

Sử dụng bánh xe cấp liệu bên trái

Friction feed wheel

Tap here to activate or deactivate the feed wheel independently of the specification in the knitting program.

The feed wheel is switched on.

The feed wheel is switched off.

Friction feed wheel

You can adjust the speed of the friction feed wheel dependent on the knitting mode (value range: 50-100%).

Friction feed wheel - Adjust the speed

Khởi động ngắn bánh xe cấp liệu bên phải

Friction feed wheel

Tap here to run the feed wheel for a short time, for example to make the thread-up easier. After 60 seconds, the function is automatically deactivated.

The feed wheel is switched on.

The feed wheel is switched off.

Sử dụng bánh xe cấp liệu bên phải

Friction feed wheel

Tap here to activate or deactivate the feed wheel independently of the specification in the knitting program.

The feed wheel is switched on.

The feed wheel is switched off.

Friction feed wheel

You can adjust the speed of the friction feed wheel dependent on the knitting mode (value range: 50-100%).

Friction feed wheel - Adjust the speed

Kẹp và cắt

Opens the dialog box in order to clamp or to release the yarn with the clamping and cutting device.

Xoay tiếp

Turn belt take-down forward.

For example, to remove a fabric winding from the auxiliary take-down.

Mở kéo căng vật dệt

Open or close the belt take-down.

For example, to remove a fabric winding from the belt take-down.

Xoay ngược

Turn the belt take-down back.

For example, to remove a fabric winding from the belt take-down.

Chải kéo trở xuống

The comb hooks are opened; the comb moves to its lowest position.

For example, if you must cancel a recently started fabric. To be able to restart the fabric, the comb must be brought downwards to the starting position.

Móc lấy sợi chải kéo

The comb moves upwards, grasps the comb thread and pulls it down.

For example, when the comb sequence is interrupted by a stop motion. In rare cases it may happen that the comb sequence is not continued automatically.

With the help of this button the comb sequence is continued.