Border Processing of the Area with Selective Weft Yarn
For patterns with the machine with presser feet and selective weft yarn, the border of the area for the weft yarn (color field) must be corrected. The border processing (correction) ensures to catch and keep deep the weft yarn by the presser foot in the reversal of the weft yarn carrier.
The border processing will be done within the whole pattern.
Activate the 'border processing' function.
- 1
- Open the dialog via the / menu.
- 2
- Select the tab.
- 3
- Activate the
Enclose the weft yarn at the last needle function under . - The color fields (areas) with weft yarn are adapted throughout the pattern by the technical processing depending on the carriage stroke direction.
No border processing will be entered for weft yarn insertions over the complete pattern width.
Requirements for setting up the border processing:
- Yarn carrier must be defined as weft yarn carrier by the
icon or must have a YCI correction >=30. - The rows for the weft inlay must have the Weft yarn / Transferring with Float needle action.
- The presser foot must be activated in this row of weft inlay.
Attention!
Border processing depends on the carriage direction