Machine specific NP corrections

When to use:

Working with MC-NPK or MC-NPGK:

  1. You are signed in as Senior Operator .
  2. The knitting program is loaded and the production was started.
    1
    In the main navigation bar Set up Order is selected.
    2
    Select Prepare Machine in the bottom navigation bar.
    3
    Open the Setup Editor with the key.
    4
    Select the Stitch Length in the window.
    5
    Open the NP or NPGK tab.
    6
    Enter the desired machine specific correction value to the corresponding NP index in the MC-NPK or MC-NPGK column.
  1. This value is automatically applied to the NPGK tab.

Without NP groups

With NP groups

  • NP tab

  • NP tab

  • NPGK tab

  • NPGK tab

 

These machine-specific NP correction values remain active at the machine until they will be deleted by the Loading Options setting when creating a new order.

    7
    Close Setup Editor by the Close button.

Deleting the machine-specific correction values MC-NPK / MC-NPGK:

  1. You are signed in as Senior Operator .
  2. Machine specific correction values are available on the machine.
    1
    Select Set up Order in the main navigation bar.
    2
    Tap on Edit Order in the bottom navigation bar.
    3
    Then, first exit the current order with the Exit Order button.
  1. In case of changes in the pattern, a prompt appears for saving the changes.
    1
    Save changes if necessary.
    2
    Open the menu with the Loading Options button.
    3
    Select the desired loading option:
    1
    Close the menu with OK.
    2
    Create a new order with the Create New Order button.