Set Loading Options

Loading Options

  1. In the Create new order window, the setting 2. Loading Options must be selected.
    1
    If necessary, switch to 2. Loading Options with the buttons.
  1. The window is displayed.

 

1

Loading Options for All Positions:

 

EALL

Delete all data of the previous order.

EAY

Delete the yarn carrier positions of the previous pattern.

:

  • Recommended for patterns with comb and clamping / cutting
  • Not recommended for patterns without comb and clamping / cutting

EAYSEQ

Delete yarn carrier home position after each position of the order (knitting program).

: This function is only active, if two or more positions (knitting programs) are selected for the order.

EYLC

If a YLC device is used for the yarn length control.

Delete YLC correction values of the previous order ("Working with mm" mode).

Use Master Setup:

Select whether a Master Setup should be used.

: This function is only active, if two or more positions (knitting programs) are selected for the order.

A

Button for selecting the location (path) of the desired Master Setup.

B

Do not use Master Setup

Use Master Setup

 

2

Loading Options for Individual Positions

 

Name

 

 

SIN

JAC

SET

 

 

List of all selected knitting programs

The program element is switched on (active), i.e. it is used for the production (default setting).

The program element is switched off (inactive), i.e. it is not used for the production.

Symbol for using a Master-Setup in the SET column.

 

: You can individually switch on or off these program elements.

 

Library

If a separate Sintral program (Auto Sintral) is required, it is to be saved in the library.
For this purpose continue with the Library chapter.

    2
    Selection of all required loading options.
    3
    Press the Create order button to complete the order and to return to the previous window.
  1. An order with one knitting program was created.

-  or  -

    4
    With the Cancel button, cancel the process and return to the previous window.
  1. Create order is canceled without loading a new knitting program.

When canceling the process, the previous knitting program is not deleted or overwritten!

If a separate Sintral program (Auto Sintral) is required, then it continues in the next chapter Library.