Operating modes of CMS 822 HP

Operating mode with comb and clamping / cutting

Operating mode using the comb:
The knitting program (Sintral, Jacquard, Setup) is structured the way that the comb function is called-up at the start of the program and the cast-off function at the fabric end.
Result:
Each piece is started with the comb and cast-off at the end.
Single fabrics are produced.

There must not be a fabric in the needle bed or main take-down.

Narrow coupled: 1-piece
	Machine does work in Fully-Fashion mode (PF0 command) The fabric is generally positioned in the machine center. SEN and F1 define the entire needle bed width The #L and the #R counter define the actual knitting width Yarn carriers are positioned in the Clamping and cutting device Comb is active
Narrow coupled: 2-pieces
	Machine does work in Fully-Fashion mode (PF0 command) Two pieces can be knitted SEN and F1 define the entire needle bed width The #L1 and the #R1 counter define the knitting width of the left piece The #L2 and the #R2 counter define the knitting width of the right piece Yarn carriers for the left fabric in the left clamping and cutting device Yarn carriers for the right fabric in the right clamping and cutting device Comb is active
Wide coupled 2-pieces
	Machine does work in Fully-Fashion mode (PF0 command) Two pieces can be knitted SEN and F1 define the entire needle bed width The #L1 and the #R1 counter define the knitting width of the left piece The #L2 and the #R2 counter define the knitting width of the right piece Yarn carriers for the left fabric in the left clamping and cutting device Yarn carriers for the right fabric in the right clamping and cutting device Comb is active

Operating mode without comb and clamping / cutting

Operating mode without using the comb:
The knitting program (Sintral, Jacquard and Setup) comes with a draw thread at the start.
The draw thread enables to separate the pieces after knitting or ironing.
Result:
The individual pieces are knitted in a common panel following each other.

With this operating mode a fabric must always hang in the needles.

Narrow coupled: Multi-piece
	Machine does not work in Fully-Fashion mode (PFN command) A maximum of 4 fabrics (SEN1-SEN4) can be positioned SEN1-4 and F1-4 define the respective knitting widths Home position of the yarn carriers (YG1 - YG4) The yarn carriers are positioned at the left and right fabric selvedge correspondingly Comb and clamping and cutting device are disabled
Wide coupling (tandem)
	Machine does not work in Fully-Fashion mode (PFN command) Up to 4 fabric pieces per carriage SINTRAL contains only the information for the left fabric Result: The machine control copies the information of the left fabric for the right fabric. The selected coupling width defines the distance between the fabrics The yarn carriers are positioned at the left and right fabric selvedge correspondingly Comb and clamping and cutting device are disabled

Additional Information