Operating mode with comb
Make the setting for tandem with comb:
- You are signed in as Senior Operator .
- An empty row is active.
- 1
- In the main navigation bar switch to Configure Machine.
- 2
- Then, in the bottom navigation bar select Options.
- 3
- Open the tab.
- 4
- With the Tandem with comb button activate the setting .
- The function is activated and the button is now displayed in yellow.
- The comb and clamping / cutting are activated.
- 1
- Create an order with a knitting program.
If the carriage assembly operate coupled wide, all needles outside the fabric pieces must be free of fabric.
All yarn carriers must be positioned.
- 1
- Check the yarn carriers.
- 2
- Start production.