Connect mains supply
DANGER
Life-threatening high voltage!
Electrical shock may cause death or serious injuries.
- The knitting machine must be connected by an electrician.
- Country-specific laws and regulations are to be followed.
Lead the mains supply cable to the right control cabinet:
- via the floor (1)
- coming from the ceiling (2) through the right support of the yarn guide device
How to connect the mains supply:
DANGER
Life-threatening high voltage!
Electrical shock may cause death or serious injuries.
- Deenergize on-site mains supply.
- The main switch is switched off (0)
- The mains supply to the machine is unplugged (currentless)
- 1
- Open the cover at the right control cabinet.
- 2
- Connect the mains supply to the plug (1). The plug is located in the accessories of the machine.
Make sure that the operational mains supply is loaded evenly (mains symmetry).
WARNING
Potential equalization missing!
Serious failures or faults can be caused in the machine and the electronic circuit if the terminal 
(PE) is not connected.
- Always connect terminal .
- 3
- The terminal for the protective conductor "PE" must be connected.
- 4
- Connect the plug (1) to the main switch.
- 5
- Close the cover at the right control cabinet again.