Carry out the reference run

The position of the carriage towards the needles is determined during the reference run.

Keys for carrying out the reference run

Key

Function

Call up the Service menu

Call up Reference runs window

Confirm message

Call up Main menu

  1. The carriage is located in the center of the needle bed.
    1
    Turn the main switch at the front of the machine to 1.
  1. The Stoll logo is displayed. As soon as the machine is ready, the BootOkc window appears.
    2. 2
    Tap on the Warmstart key.
  2. The Main menu appears.
    3. 3
    Call up the Service menu from the Main menu.
    4
    Call up the Reference runs window.
    4. 5
    Tap the SR!> key in the Reference run carriage field.

DANGER

danger

Danger by moving carriage!

Injuries by crushing or cutting possible.

  1. Close the covers.
    6
    Pull up the engaging rod and release it. The carriage moves at creep speed to the right and carries out a reference run.

Reference run with older machines (before August 2013):
The carriage moves automatically in both directions

During the reference run, the carriage can move independently into both directions.

The carriage stops automatically as soon as the reference data is determined. The engaging rod falls down.

    7
    The carriage stops automatically outside the needle bed. The engaging rod falls down.
    8
    The message Reference run complete is displayed on the touch screen.
    9
    Confirm message.
    10
    Move the carriage assembly into the left reversing position.
    In the Reference runs window tap on the key S< and start machine with the engaging rod.
    11
    If the carriage is located outside the needle bed, stop the machine.
    12
    In the Reference runs window tap on the key S>.
    13
    Pull up the engaging rod briefly. The carriage may run only a few centimeters towards right. The carriage must still be positioned outside the needle bed.
    14
    The reference run is complete, the machine is ready to knit.
    The carriage is positioned at the right position for you to be able to load a knitting program.
  1. Call up Main menu.

Leave the machine switched on for at least 6 hours in order to charge the accumulators fully.