Carry out the reference run

The position of the carriage towards the needles is determined during the reference run.

Keys for carrying out the reference run

Key

Function

Call up the Service menu

Call up Reference runs window

Call up Main menu

If the window Reference runs was closed, call it up again as follows: Main menu -> Service -> Reference runs.

  1. The carriage is located on the left side within the needle bed.
    1
    In the Reference run carriage field tap the SR!< key.

DANGER

danger

Danger by moving carriage!

Injuries by crushing or cutting possible.

  1. Close the covers.
    2
    Pull up the engaging rod and release it. The carriage moves at creep speed to the left and carries out a reference run.
    3
    The carriage returns outside the needle bed, it moves a short distance and stops. The engaging rod falls down.
    4
    The message Reference run complete is displayed on the touch screen.
    5
    The reference run is complete, the machine is ready to knit.
    The carriage is positioned at the right position for you to be able to load a knitting program.
  1. Call up Main menu.

Leave the machine switched on for at least 6 hours in order to charge the accumulators fully.