Setting / Adjustment of the Weft Yarn Presser Feet

I. Setting / Adjustment of the Weft Yarn Presser Feet

  1. You are signed in as Senior Operator .
  2. Knitting program is loaded.
  3. The production was started.
    1
    In the main navigation bar select Set-up Order.
    2
    Switch to Set-up pattern in the bottom navigation bar.
    3
    With the or the button, open the Test the weave-in device menu.

Double button

Inactive button (white)

Weft yarn presser foot is inactive

Active button (orange)

Weft yarn presser foot is active

Weft yarn presser foot activated (down)

Weft yarn presser foot deactivated (up)

 

    4
    With the help of the buttons or check the weave-in devices in the selected area.

Incorrect position of the weave-in device

See operating instructions for horizontal and vertical adjustment of the presser foot.

    5
    Exit the menu with the OK button.