Reference Runs

Perform the following reference runs after the installation:

  1. The Reference Machine menu is displayed.
    1
    Tap the button or the button.
    2
    Start the machine with the engaging rod.
  1. The message for a comb reference appears.
  2. Observe the note!!
    3
    With the Yes button confirm the message.
  1. The comb reference is performed.
    4
    Tap on the desired carriage direction for the reference run.
    5
    Then, start the machine again with the engaging rod.
  1. The carriage moves at creep speed until the reference run is carried out.
  2. Racking and step motor reference is performed in the right carriage reversal.
    6
    The message window Reference run appears.
    2. 7
    Confirm the message with the Yes button.
  1. The yarn carriers to be referenced are being referenced .
    8
    The next Reference run message appears.
    2. 9
    Confirm the message with the Yes button.
  1. Observe the note for the reference of the weave-in device!
  2. The weave-in devices are referenced .
  3. All references were performed.
    10
    With the Close button, exit the Reference machine window.
  1. The note for the racking reference appears in the next reversal. Please take into consideration!

Il carro esegue una corsa di riferimento e si arresta dopo aver caricato i dati di riferimento.

    11
    Continue with Create Order.