Carry out reference runs
Two reference runs are necessary:
- The position of the carriage towards the needles is determined during the carriage reference run.
- The autarkic yarn carriers are synchronized during the yarn carrier reference run. They move outwards to their end stop, then to the clamping position above the clamping and cutting bed.
|
Icon / key |
Meaning |
|---|---|
|
|
Icon Yarn carrier not referenced |
|
|
Icon Yarn carrier ready to knit |
|
|
Call up Main menu |
Carriage reference run
- The carriage is located in the center of the needle bed.
- 1
- In the Reference run carriage field tap the SR!< key.
위험
Danger by moving carriage!
Injuries by crushing or cutting possible.
- Close the covers.
- 2
- Pull up the engaging rod and release it.
- The carriage moves at creep speed to the left and carries out a reference run.
- 3
- The carriage stops automatically outside the needle bed. The engaging rod falls down.
- The message Reference run complete is displayed on the touch screen.
Reference run of yarn carriers
- 1
- The Reference run of yarn carriers window appears automatically.
- 2
- Tap on the Reference all key.
- 3
- The yarn carriers are automatically referenced consecutively rail by rail.
- The yarn carriers move outwards to their left and right end stops, then to the clamping position above the clamping and cutting bed.
- 4
- If a yarn carrier is referenced, the icon changes from Yarn carrier not referenced to Yarn carrier ready to knit.
- 5
- After completing the yarn carrier reference run, all the yarn carriers are ready to knit.
- 6
- The reference run is complete, the machine is ready to knit.
The carriage is positioned at the right position for you to be able to load a knitting program.
- Call up Main menu.
Leave the machine switched on for at least 6 hours in order to charge the accumulators fully.