Connect mains supply
အန္တရာယ်
Life-threatening high voltage!
Electrical shock may cause death or serious injuries.
- The knitting machine must be connected by an electrician.
- Country-specific laws and regulations are to be followed.
Lead the mains supply cable to the right control cabinet:
- via the floor (1)
- coming from the ceiling (2) through the right support of the yarn guide device
How to connect the mains supply:
အန္တရာယ်
Life-threatening high voltage!
Electrical shock may cause death or serious injuries.
- Deenergize on-site mains supply.
- The main switch is switched off (0)
- The mains supply to the machine is unplugged (free of tension)
- 1
- Open the cover at the right control cabinet.
- 2
- Connect the mains supply to the plug (1).
The plug is located in the accessories of the machine.
Make sure that the operational mains supply is loaded evenly (mains symmetry).
|
Mains supply |
Example for mains symmetry | ||
|
Connection variant |
| ||
|
|
|
| |
|
X (L1) |
Y (L2) |
Z (L3) | |
|
Y (L2) |
Z (L3) |
X (L1) | |
|
G (PE)
| |||
|
| |||
အသိပေးချက်
Potential equalization missing!
Serious failures or faults can be caused in the machine and the electronic circuit if the terminal 
(PE) is not connected.
- Always connect terminal .
- 3
- The terminal for the protective conductor "G (PE)" must be connected.
- 4
- Connect the plug (1) to the main switch.
- 5
- Close the cover at the right control cabinet again.