Picking-up after Pressing-off Function

Setting

Function

#90=0

Switch-off the Picking-up after Pressing-off function

#90=1

Activate the picking-up after pressing-off function
(Automatic calculation of the length - depending on the gauge)

#90=n

The picking-up after pressing-off function is executed n times

#41 / #42

  • #41 identical to #L
  • #42 identical to #R

#51 / #52

Auxiliary counter for defining the start width of the fabric

: The counter values do not change during the knitting.

Start the picking-up after pressing-off function

  1. You are signed in as Senior Operator .
  2. The knitting program is loaded and the production was started with the Start line 1 (SP 1) setting.
    1
    Select Intervene Manually I in the bottom navigation bar.
    2
    Press the Picking-up after pressing-off M1plus (#90) button.
  1. The Picking-up after pressing-off M1plus (#90) menu is opened and the counters #L (#41) and #R (#42) are set.
    2. 3
    Perhaps, deactivate the # 51 and #52 buttons, to be able to set manually the counters #L (#41) and #R (#42).
    4
    Check the inputs.
    5
    Under # 90 enter the desired value: e.g. 1.
    6
    Press the Start picking-up after pressing-off button.
    7
    Exit the dialog with the Close button.
    8
    Engage machine (start).
  2. The machine stops to check the yarn carriers.
    3. 9
    Engage the machine again.
  3. The gauge-dependent length calculation for picking-up after pressing-off is executed and knitted.
  4. After processing the function picking-up after pressing-off, the counter #90 is set to =0 and the machine is stopped.
    - or -
    perhaps exit the function prematurely when the fabric reached the desired length.
    5. 10
    Take the fabric into the take-down:
    Via the main navigation bar select the main area Set up Order
    - or -
    select Produce Order.
    11
    Then, in the bottom navigation bar tap Intervene Manually II.
    12
    With the Open fabric take-down button open the main take-down to pull the fabric through.
    13
    Then, close the main take-down again with the Close fabric take-down button.
    14
    Engage the machine again.
  1. The function picking-up after pressing-off is closed and the knitting program is being processed.

The function picking-up after pressing-off will no longer be called-up during the production.
Usage only at knitting start on the empty needle bed, in case of yarn breakage or other occurring situations, where the entire fabric is no longer in the main take-down.

Cancel the function picking-up after pressing-off before the end

In case of sufficient fabric length, the function Picking-up after pressing-off can be canceled before finishing the automatic length calculation..

    1
    Select Prepare Machine in the bottom navigation bar.
    2
    Tap the key.
    3
    In the tab open the Counters 51-99.
    4
    Under #90 enter the value 0 and confirm.
  1. The machine stops and the fabric can be taken to the take-down.
    2. 5
    Under Intervene Manually I press the Restart fabric automatically [Ctrl-Z] button
    - or -
    press the Restart fabric [SP] button, perhaps do not enter the desired start line (1 or 40) until from line [SPn]
    6
    Start machine (engage).
  1. The knitting program is automatically started until the machine stops again to check the yarn carriers. After the inspection it is possible to continue knitting.