Racking
Enter manually the correction values for the racking.
|
|
The position of the rear needle bed relative to the front needle bed is set with the VGK value (factory setting). If part of the racking device is replaced, e.g. the racking motor or the racking belt, the VGK value has to be set anew. |
|
|
Fine adjustment of the transfer racking. The rear needle bed is aligned exactly relative to the front needle bed. |
|
|
With this racking correction the rear additional needle bed is aligned exactly relative to the front needle bed. |
|
|
With this racking correction the front additional needle bed is aligned exactly relative to the rear needle bed. |
Enter manually the machine data
If the current values of the machine data have got lost, and there is no dongle data available, then the data can be entered manually.
- Factory settings
When delivering the knitting machine, the machine data was printed out and put on the right control cabinet.
- Current settings
You will find the values in the Ustawienia podstawowe menu.
Widok danych -> 
Informacja systemu -> 
Ustawienia podstawowe