Handling the Braking Values

Adjust the intarsia yarn carriers mechanically correct on the machine at first.

Valuate braking values:

  1. You are signed in as Senior Operator .
  2. Knitting program is loaded.
  3. The yarn carriers are adjusted mechanically correct.
    1
    Execute with the Start production button.
    2
    Engage machine.
    3
    Switch to Prepare Machine in the bottom navigation bar.
  1. The dialog with the yarn carriers in use is displayed.

1

Selected yarn carrier (blue marking)

2

Information area

Display of relevant information about the selected yarn carrier

3

The knitting yarn carrier (yellow marking) with the bottom plunger symbol.

4

Button for switching the plungers when using normal yarn carriers.

: Not possible with intarsia yarn carriers. These must be switched individually.

5

Open the dialog for entering the braking values left / right

6

Display of yarn carrier table

    4
    Select the yarn carrier to be edited in the dialog.
    5
    Tap the button.
  1. The dialog for entering the values for the selected yarn carrier is opened.
    6
    Enter the value for Braking value on the left / Braking value on the right via the virtual keyboard.
    7
    Tap the Preluarea tuturor valorilor și închidere key.
  1. Values are applied and the display is switched back to the previous dialog box.
    8
    Check the position again when this yarn carrier is knitting the next time
    9
    Select the next yarn carrier in order to determine the braking value.

Check the parking positions of every yarn carrier with both the knitting directions to the left and right.

Correction values „Ba“ for parking positions on the left and „Bb“ for the right:

Pos

Situation

1

Yarn carrier at the left color field not corrected

2

Yarn carrier at the left color field corrected

3

Yarn carrier at the right color field corrected

The changes in the table for braking values are not reset with EALL / EAY