Miscellaneous
|
|
The lighting of the needle beds will be switched off automatically at the end of the set time. |
|
|
The current knitting program is saved together with the Loggings (logfiles). This is important when sending data for diagnostic errors to the STOLL helpline. |
|
|
If an error occurs, the machine stops and the alarm signal sounds. You can set the volume, and the interval between two alarm signals. Standard setting: off |
|
|
Time prolongation until the final switching off of the machine in order to give time to windows for separating all network connections properly. If the power failure lasts more than 30 seconds (standard setting), the computer of the knitting machine is automatically shut down. The time until the computer shuts down can be set from 2 to 180 seconds. |
|
|
Graphic representation of the needle actions, of the Jacquard line etc. in the Configurare model menu.
Standard setting: off |
|
|
When switching off the main switch, the fabric take-down is opened. The fabric tension is released. With a delicate fabric, no stitch elongations occur then. |
Machine with main take-down
|
|
Enter the waiting time until the belt take-down will be opened after a machine stop (Default = 15 minutes). |
|
|
Using the order menu, the various making-up sizes of an item (knitting program) in a list are gather together and processed one after another. The number of pieces, the cycle counters, and the counters are specified for each making-up size. |
|
|
You can create an order from individual program elements (sin, jac, setx). The individual program elements cannot be found in a zip file.
|