Needle Bed Distance


Needle Bed Distance

Make settings for the Needle Bed Distance

You have the following options in the context menu:

to

Select directly entry 1 to 3 from the Needle Bed Distance tab of the Pattern Parameters .

Pre-defined standard entries
These cannot be deleted or edited.

  • Small (1)
    Approximately the same distance as the standard machine.
  • Medium (2)
    Approximately the same distance as the multi gauge machine.
  • Large (3)
    Approximately the same distance as the k&w machine.

  • Sintral: NBD=n-m
    • n = front needle bed
    • n = rear needle bed
    • Value range: 0.00-10.00 mm
  • Example:
    30 << S:R-0;    Y:0;   NBD=2.20-3.50  S1 S2 S3

et seq.

Select directly an entry from the Needle Bed Distance tab of the Pattern Parameters .

默认

Sets the setting on 默认.

Applies the entry of the default setting from the header row.

删除

Deletes the entry.

在表中显示

Opens the Needle Bed Distance tab of the Pattern Parameters .

There you can make further settings and then apply them to the pattern.

显示工具提示

  • Show ToolTips