Overview of the YLC modes 1 – 8 (up to OKC operating system V. 2.7)

	Designation	Explanation
YLC1	Measuring + regulating, depending on <->	A separate correction value is determined for each carriage direction. The stitch cams will be corrected if necessary.
YLC2	Adjusting stitch cams	Adjustment program required D\Stoll\M1plus\5.2.xxx\Sintral\YLC\cmsxxx.ylc2_npk-adjustment.zip Program-DVD M1plus (V. 5.2 or higher)
YLC3	Measuring in test fabric for mode 1, 7 or 8	Generate test fabric piece before starting the production.
YLC4	Determine measuring + correction values for modes 1, 7 or 8.	Determine correction values before the production Apply correction values for the production
YLC5	Measuring in the original fabric for mode 6	The YLC5 data for the original fabric (Master Piece) will be determined. No YLC regulation.
YLC6	Regulating with values from mode 5	The YLC5 data is used as target value for all further fabrics.
YLC7	Measuring + regulating, independent of <->	A correction value is determined independent from the carriage direction. Difference compared to YLC1 .
YLC8	Measuring + regulating, depending on <-> and S1-Sn	similar to YLC1. A separate correction value is determined for each carriage direction and knitting system. The stitch cams will be corrected if necessary.
YLC0	Switch off (neither measure nor control)	Machine works without YLC correction values. YLC0 indicates that a YLC device is logged-on on the machine.

Application areas of the modes

Pattern	If required: Determining correction values	Generate original fabric (Master Piece)	Production
Standard fabrics (width: ≥ 7 inches) Sequence Continuous fabrics	YLC4 Determine correction values before the production		YLC1 A separate correction value is determined for each carriage direction.
	YLC3 Determining correction values with test fabric piece		YLC8 A separate correction value is determined for each carriage direction and knitting system.
	YLC3 Determining correction values with test fabric piece		YLC7 A correction value is determined independent from the carriage direction.
with irregular yarn consumption (change of the knitting mode, single jersey / double jersey) Narrow fabrics (width: ≥ 5 inches), e.g. with knit and wear articles Sequence (only possible with Setup2)		YLC5 Generate original fabric	YLC6 The YLC5 data is used as target value for all further fabrics.