Adjusting the Stitch Cams with Programs from the M1plus

:
To adjust the stitch cams, you will find adjustment programs and a manual in the D:\ Stoll\ M1plus\ 5.X.XXX\ Sintral\ YLC directory by default

:
Load and run the machine dependent adjustment program *.zip on the CMS-OKC with the operating system V 2.1 (or higher) in order to re-adjust the stitch cams.

The adjustment programs for different types of machines:

CMS	Special feature	Yarn Carrier and Measuring Wheel	Program
CMS 520 CMS 530 CMS 730 CMS 740 CMS 822	Comb thread left on bar 2	Specify the yarn carriers and measuring wheels by RS18 inSetup2. YGC:2/4	CMS5xx.YLC2_NPK-Adjustment_Combthread-left.zip
CMS 502, CMS 420 E CMS 520 CMS 530 CMS 730 CMS 740 CMS 822	Comb thread right on bar 2	Specify the yarn carriers and measuring wheels by RS18 inSetup2. YGC:/24	CMS5xx.YLC2_NPK-Adjustment_Combthread-right.zip
CMS 730 S CMS 830 S	Gauge E3,5.2 \| E5.2 \| E6.2 \| E7.2 Comb thread left on bar 2	Yarn carrier 4 at the right Measuring wheel 4 active YGC:2/4	CMSx30S.YLC2_NPK-Adjustment_Combthread-left.zip
CMS 730 S CMS 830 S	Gauge E9.2 Comb thread left on bar 2	Yarn carrier 4 at the right Measuring wheel 4 active YGC:2/4	CMSx30S.YLC2_NPK-Adjustment_Combthread-left 9.2.zip
CMS922 CMS933	Two yarn carrier for residual yarn (widening and cast-off functions) Bar 1 right and bar 2 left.	Yarn carrier 4 at the right Measuring wheel 4 active YG:2/1 4	CMS9xx.YLC2_NPK-Adjustment.zip
CMS 530HP B CMS 502HP+ B CMS 502HP B	Belt take-down	Yarn carrier 4 at the right Measuring wheel 4 active YGC:2/4	CMS5xx.ylc2_npk-adjustment_Belt_take-down.zip
CMS ADF B	ADF Belt take-down	Yarn carrier 4 at the right Measuring wheel 4 active YGC:2/4	CMSADF.ylc2_npk-adjustment_Belt_take-down.zip

Additional Information