Overview over the YLC modes MM and MP

Application areas of the modes

	Pattern	Determine Basic Conditions	Production
Working with mm YLC MM	Standard fabrics (width: ≥ 7 inches) Sequence Continuous fabrics	Determine basic conditions before the production	A separate correction value is determined for each stitch cam position (knitting mode). Further information regarding stitch cam position (knitting mode).
Working with original fabric (Master Piece) YLC MP	with irregular yarn consumption (change of the knitting mode, single jersey / double jersey) Narrow fabrics (width: ≥ 5 inches), e.g. with knit and wear articles Sequence (only possible with Setup2)	Draw the original fabric	The YLC data is used as target value for all further fabrics.

Pattern

Determine Basic Conditions

Production

Working with mm
YLC MM

Determine basic conditions before the production

A separate correction value is determined for each stitch cam position (knitting mode).

Further information regarding stitch cam position (knitting mode).

Working with original fabric
(Master Piece)
YLC MP

with irregular yarn consumption (change of the knitting mode, single jersey / double jersey)
Narrow fabrics (width: ≥ 5 inches), e.g. with knit and wear articles
Sequence (only possible with Setup2)

Draw the original fabric

The YLC data is used as target value for all further fabrics.

Current mode when knitting

The current YLC mode will be displayed on the bottom right in the state line as soon as a YLC area is reached in the knitting program.

	Designation	Explanation
REC MM MM	Measuring the YLC data	The YLC data for the Working with mm will be determined.
YLC MM MM	Measuring + regulating, depending on <->	A separate correction value is determined for each carriage direction. The stitch cams will be corrected if necessary.
REC MP MP	Measuring the YLC data for Master Piece	The YLC data for the original fabric (Master Piece) will be determined. No YLC regulation.
YLC MP MP	Regulating with values from REC MP	The YLC data is used as target value for all further fabrics.
YLC MIN -	Suspending	The regulation for a carriage stroke is suspended.
YLC OFF --	Switch off (neither measure nor control)	Machine works without YLC correction values (Production without YLC mode). YLCOFF indicates that a ASCON device is logged-on on the machine.
YLC1 : YLC8		YLC modes for OKC operating system V. 2.7 (or former)

Informations complémentaires