Edit Order

Basics

တည္းျဖတ္ရန္

Opens the dialog box for modifying the combination of the knitting programs in the current order.

The already selected knitting programs are highlighted in color.

Select knitting programs

ေအာ္ဒါ အသစ္ ဖန္တီးပါ

Opens the dialog box in order to create a new order.

Create New Order

ရွိၿပီးသား ေအာ္ဒါကို ဖြင့္ရန္

Opens the dialog box in order to load an existing order.

Load Existing Order

Enter piece quantity
  • Enter the piece quantity for this position (knitting program).
  • Enter the quantity of the run-throughs for the entire order.

1

Enter the piece quantity for this position (knitting program).

Tap on this field and enter the piece quantity in the အထည္ အေရအတြက္ dialog.

BMS machine: A change while production is running is not possible.
Remedy: Suspend production, change the piece quantity for the position, continue production.

Changing an order

2

Enter the quantity of the run-throughs for the entire order.

Increase quantity

Reduce quantity

Changing an order

3

If the quantity of run-throughs is greater than "1", this will be represented graphically with a loop.

For more available possibilities, please turn to:

Changing an order

သိမ္းရန္

Opens the dialog box for saving the current order.

You can determine the storage location and the name of the order:

  • Save - don't make changes
    • The order will be overwritten
  • Save - change the name or storage location
    • The order will be saved with the new name or at the selected storage location

You can save the Master Setup file separately.

Saving the Master Setup file only

ထုတ္လုပ္မႈ စတင္ပါ

The order is released for the production.

Transfer the order to the operator, the production can start.

သတ္မွတ္ စနစ္

This function is only active, if the order consists of two or more positions (knitting programs).

The setup mode serves for fine tuning the individual positions on the machine. For example:

  • Set cycle counters
  • Adapt WM values and stitch length
  • When working with a yarn length measuring device (YLC)
    အေျခခံ အေျခအေနမ်ားကို ဆံုးျဖတ္ရန္

You can set up one position after the other. In the setup mode the piece counter is automatically set to 1.

If the fabric is finished, the machine stops (piece counter at 0). You can control the fabric piece.

Setup Mode

ေအာ္ဒါ-

Enter order name.

Tap on this field and enter an order name using the virtual keyboard.

If you saved the order (button သိမ္းရန္), the order name is entered here.

ဖိုင္တြဲ-

Save location of order.

ေရြးခ်ယ္စရာမ်ားကို ဖြင့္ေနသည္

Here you determine what is to be done with the previous data when loading a new order or a new knitting program.

Set Loading Options

သိုးေမြးထိုးရန္ အစီအစဥ္မ်ား

Opens the dialog box to manage files and folders of knitting programs.

မာစတာ သတ္မွတ္မႈကို-

Select whether a မာစတာ သတ္မွတ္မႈ should be used.

မာစတာ သတ္မွတ္မႈ is the designation for the Setup file that is used for all the knitting programs of this order.

The button is divided into two areas:

A

Select the path (storage location) of the desired Master Setup. Tap the (A) button for this.

B

မာစတာ သတ္မွတ္မႈကို-, switch on or off.
Activate: For this tap on the button (B). It is highlighted in color.

Select Master Setup