ဘာသာစကား
English
Deutsch
Türkçe
Chinese (simplified)
Tiếng Việt
Español
Portuguese
မြန်မာစာ
နေအိမ်
What is new in CKC V2.0?
New component type for BMS machines
Belt take-down with gauge E3,5.2 - The belt speed was increased
------------------------------------------------------------
What is new in CKC V1.4?
Enter feed wheel type
Yarn carrier carriage for different knitting situations
Import or export network drives and further machine settings
Edit Order - The names of the program elements are displayed
PPS - The knitting time entered in the ticket is displayed, while the first fabric is produced
Yarn table (BMS)
Economic production and the influencing factors
What is new in CKC V1.3?
Comb take-down - The take-down force has been increased
Stitch cams positions (NP) raised to 500
Expert tip: Modify the Setup file of a non active position (knitting program).
Order Menu
Activate Order Menu
APM Mode - Cancel production, produce ticket again
What is new in CKC V1.2?
New machine gauge (BMS)
Improved carriage reversal
New knitting functions
Lighting for needle bed and fabric collection chamber
What is new in CKC V1.1?
New machine gauges (BMS)
ASCON
Improved carriage reversal
Not Sunken Tuck (Tight tuck)
New yarn carrier carriage
Overview of the electronic control
Quick Start Guide
CKC Online Help
Philosophy of the User Interface
Design of the user interface
Roles and Rights
Knitters Workspace - Produce Order
Overview of the Operating Sequences
Information area
Errors and Messages
Machine information
Production information
Change Shift
Change User Group
Set-up Order
Edit Order
Prepare Machine
Set-up Pattern
Knitting Systems
Technical View
Edit Pattern
Intervene Manually I
Intervene Manually II
Produce Order
Monitor Order
Monitor Production
Edit Ticket
Intervene Manually I
Intervene Manually II
Maintain Machine
Wartungsplan
Lubrication
Edit Ticket
Service
Diagnostics
Configure Machine
Operating Settings
Carriage
NPK Values
Miscellaneous
Controls
Needle Bed
Options
Devices
EVP
EVP - The states of the system time
Fournisseure
Maintenance
Clean Selection Systems
Lubricating
Machine Data
Comb
Racking
Needle Bed
Carriages
System Settings
Display
Time and Language
User
Set PINs
Set Permissions
Set Shift Plan
Data Management
Data Transfer
View Data
Report Data
Production Data
Run time data of the current order
Run time data of the previous order
Yarn Consumption
Messages
Stop Motions
Warnings
Notes
History
System Information
General
Basic Settings
Yarn Carrier Corrections
Logfile
CMMI
MC
Dialogs (help topic, wizards)
When the Order Is Completed
Copying Permissions
Change the settings for the current fabric.
Repair yarn breakage error
Dialog "Repair yarn breakage"
Detailed description
Short description
Description of the dialog
Explanation of the terms
Picking-up after Pressing-off Function
Graphical overview over the yarn carrier home position
Set horn
No help available for this page
No Optimal Production
Greasing the Linear Guidance
Re-knitting
Oil needle bed
Map Network Drives
Saving the Master Setup file only
PPS – Send message
Report (table)
Make changes to Sintral and Jacquard program
Set Time
Racking (Home Position)
Grease racking spindle
Counters
Set the counting method of the run-throughs
Examples
Hide all blocked menus
APM Mode - Cancel production, produce ticket again
Create Order
Create New Order
Select knitting programs
Select Master Setup
Load Existing Order
Set Loading Options
Changing an order
Exit Order
Order Menu
Activate Order Menu
Create order menu
Load Order Menu
Produce order menu
Look at run-time data
User rights (STOLL Default)
CMS-EKC and Ethernet
Switch on or off the needle selection and the yarn carriers in the corresponding carriage
Documents about your knitting machine
How to find the documents about your knitting machine
Accelerate and slow down a yarn carrier while preserving the yarn
Setup Mode
EVP - Order numbers
Overview to EVP
Shape counters absolute
Adjusting Shape Counters
Apply Shape Counter
Friction feed wheel - Adjust the speed
Helpful knitting rows
Loading options visible with running production
Logfile
Import or export machine settings and network drives
Machine-specific NP correction (MC-NPK)
Remove needle bed or position it at an angle
Releasing needle bed
Releasing needle bed
Remove needle bed or position it at an angle
Screwing on needle bed tight
New "EXIT" command - Finalizing a cycle when a certain condition is fulfilled
Correction of NP groups
NPGK (tab)
PPS - Auto Production Mode (APM, APM light)
PPS - Overview
Cancel Production and Start Order Again
QR Code and Barcode Scanner
Remote Desktop Connection RDP
Select Remote Desktop Connection RDP or VNC
Export Report Data
RFID
Set lubrication interval for needle bed
Restarting lubricating interval
Lubricants
Modify the Setup file of a non active position (knitting program)
Setup Editor - Enter a comment
Setup Editor - Hide the "NPGK -> NP" key
Select a Language
Update Languages
Language overview
Enter Search Filter
Re-knitting of Fabrics
Calibrate the Touch Screen - With the Help of a Keyboard
What is an Order?
Central Lubrication - Mounting and Working Position
Deaerate central lubrication
Maintenance Schedules
Maintenance Schedule BMS
Lubricants
Symbolism
Minimize wear
Safety Instructions for Lubrication, Cleaning and Maintenance
Maintenance Schedule - The Individual Tasks
Cleaning the active thread clamp
Greasing the drive chain of the belt take-down
Oiling yarn carrier rods
Cleaning the friction feed wheel
Greasing butts of the coupling parts and intermediate sliders
Vacuuming the Interior on the Right Side
Thoroughly cleaning needle bed
Oil needle bed
Cleaning needle bed
Grease needle bed supports
Check the oil collecting container
Cleaning the permanent brakes
Oil jack bed
Cleaning the collecting clamp unit
Oiling carriage guide bar
Greasing the control sliders
Cleaning the Knitting Machine
Cleaning the touch screen
Greasing racking device
Cleaning the racking light barrier
Oiling the Toothed Belt
Zentralschmierung - Unterschied von Typ1 und Typ 2
The Buttons - Structure and Function
Symbols of the Online Help
Multi Touch Panel - Gestures and properties
Setup Editor
Take-down
WMF (tab)
WM% WMK% (tab)
WBF (tab) - Belt take-down
Buttons for Setup Data
Yarn Carrier
YD / YDI (tab)
YC / YCI (tab)
YC / YCI (tab)
Y:Ua-b (tab)
Y:Ncc (tab)
Width (tab)
Stitch Length
NP (tab)
PNP (tab)
NPGK (tab)
Carriage Speed
Cycle Counters
Yarn Length
Basic settings
Correction Values
Yarn Data
NP (Knitting Mode)
Racking
Info
Sintral Pocket Card
Infos
What is new in SINTRAL?
Changes in Version 3.0
Changes in Version 2.9
Changes in version 2.8
Changes in version 2.7
Changes in version 2.6
Changes in version 2.5
Changes in version 2.4
Changes in version 2.3
Changes in version 2.2
Changes in version 2.1
Changes in version 2.0
Changes in version 1.9
Changes in version 1.8
Changes in version 1.7
Changes in version 1.6
Changes in version 1.5
Changes in version 1.4
Changes in version 1.3
Changes in version 1.2
Changes in version 1.1
ASCII character set
Knitting Specifications
Direct commands (Knitting specifications)
Knitting specifications (additional beds)
Knitting Specifications (CMS 730 S, CMS 830 S)
Knitting Specifications (BMS)
Yarn Carriers
Direct commands (yarn carrier)
Yarn Carrier (ADF)
Yarn Carrier (X on ADF + CMS)
Clamping and cutting
Direct commands (Clamping and cutting)
Racking
Direct commands (Racking)
Direct commands (racking specifications) (CMS 330 TC 4)
Racking specifications for the additional beds (CMS 730 T, CMS 330 TC-T)
Racking specifications for the additional beds (CMS 530 T, CMS 330 TC-R)
Racking specifications for the front needle bed (CMS 330 TC 4)
Stitch cam settings / stitch lengths
Direct commands (Stitch cam settings)
Stitch cam settings (CMS 730 S, CMS 830 S)
Speed specifications
Direct commands (speed specifications)
Structuring specifications in knitting program
Stop Motions
Direct commands (stops)
Piezo stop motions (CMS 730 T, CMS 330 TC-T, CMS 330 TC 4)
Piezo stop motions (CMS 530 T, CMS 330 TC-R)
Control units
Direct commands (switch units on/off)
Presser foot for weft yarn or knitting in yarn
Switching units on and off (CMS 730 S, CMS 830 S)
Electronic Feed Wheels
Holding-down jacks
Holding-down jacks (CMS 830 C, CMS 330 TC-C)
Holding-down jacks (CMS-T: on machines with additional beds)
Holding-down jacks (BMS)
Information commands
Fabric Take-down
Direct commands (fabric take-down)
Auxiliary Take-down
Belt Take-Down
Specific commands - CMS 5xx, 7xx, 8xx, CMS ADF (OKC)
Specific commands - CMS 9xx (OKC)
Specific commands - CMS 3xx (ST 168, 268, 468)
Specific commands - CMS 4xx (ST 168, 268, 468)
Additional commands for machines with comb take-down
Direct commands (Comb take-down)
Pattern specifications
Direct commands (pattern specifications)
Jacquard
Direct commands (Jacquard)
Jacquard-dependent decisions
IF-decisions
Cycle counter and piece counter
Direct commands (cycle counters and piece counters)
Counters
Calculating with counters
Intarsia
Intarsia commands with "Stoll multi gauges" pattern technology
Intarsia (ADF )
Intarsia commands with "Stoll multi gauges" pattern technology
Fully fashion knitting
Direct commands
Yarn Length Control (YLC, STIXX, ASCON)
Service commands
Yarn carrier (Direct commands)
Racking (Direct commands)
Racking (direct commands) (CMS 330 TC 4)
Stitch cam settings (Direct commands)
Carriage movement
Carriage movement (direct commands)
Instructions (Direct commands)
Information commands (Direct commands)
Fabric take-down (Direct commands)
Quick Start Guide
CKC Training
BMS 52 – Handling
Overview of Patterns for the BMS 52 Basic Training
BMS Documents
Philosophy of the New User Interface
Rolls and Rights of Users
BMS machine
Front side
Lateral view (right)
Rear side
Main switch
Engaging rod, Emergency stop and Standby
Design of the user interface
Information area
Errors and Messages
Message: No Optimal Production
Machine information
Production information
Change User Group
Change Shift
Safety Precautions for Production
Needle Beds and their Elements
Collecting clamp unit
Threading up collecting clamp unit
Fabric take-down
Comb take-down
Belt Take-Down
Positioning the Needle Bed Upright
Operating modes of BMS 52
Elements of a knitting program
Sintral
Jacquard
Setup file
What is an Order?
Setting up the BMS machine
Loading Files, Library and Folders
Create an order with a knitting program
Select knitting program for the order (load)
Set Loading Options
Library
Deleting orders
Setting up the piece number for an order with one knitting program
Start Production
Prepare Machine
Threading up the Machine
Default Yarn Carrier Home Positions
Threading up from the Bobbin Board to the Yarn Carrier
Threading up the yarn control unit
Threading up the Friction Feed Wheel
Threading-up the Permanent Brake
Threading-up the Lateral Yarn Guide
Adjustment of the lateral yarn guide
Threading-up the normal yarn carrier
Locking yarn ends
Position the Yarn Carriers
Thread up the Yarn Carriers after Yarn Breakage
Setting up the pattern
Edit Pattern
Check the yarn carriers
Save the order with a knitting program
Produce Order
Monitor the order with one knitting program
Monitor the production with one knitting program
Re-knitting of fabrics
Load Existing Order
Full Cardigan, 2 Colors / Tuck
Operating Mode of the Machine and Knitting Program
Create and set-up an order with a knitting program
Setting: Cycle Counters
Setting: Stitch Length
Setting: Carriage Speed
Setting: Fabric Take-down
Additional Setting: Belt take-down and comb
Save the order with a knitting program
Cycle counter RS17 with constant fabric width (without fully fashion)
Cable_4x4
Operating Mode of the Machine and Knitting Program
Create and set-up an order with a knitting program
Optimized yarn carrier home position YDopt
Racking Positions and Racking Commands
Make settings for racking
Save the order with a knitting program
Working in the Sintral / Jacquard editor: Edit Pattern
Example with stitch length groups and their handling
Advantages with Grouping Stitch Lengths
Create and set-up an order with a knitting program
Working with grouped corrections of the stitch cams NPGK
Machine specific NP corrections
Save the order with a knitting program
Front fully fashion
Additional Information with Fully Fashion - with Comb
Widening / Narrowing of Fully Fashion
Widening Procedure by the Example of Single Jersey fabric
Narrowing Procedure by the Example of Single Jersey
Binding-off Procedure by the Example of Single Jersey Fabric
Create and set-up an order with a knitting program
Cycle Counter RS17 with different Fabric Widths (with fully fashion)
Fully fashion - order with several knitting programs
Behavior with an order with several knitting programs
Create order with several knitting programs
Select knitting program (load)
Set Loading Options
Deleting all settings
Setup Mode
Set the piece number and the run-throughs and start the production
Save the order with several knitting programs
Working with Master Setup with orders with several knitting programs
Jacquards with different backs - Order with several knitting programs
Knitting Technique: Jacquard
Jacquard float
Jacquard float without transfer
Jacquard Float with Cast-off
Jacquard stripe
Jacquard stripe relief
Jacquard twill
Jacquard twill relief
Jacquard net (cross-tubular)
Jacquard Net 1x1
Jacquard Net 1x2
Jacquard Net 1x3
Jacquard Net 1x1 with Transfer
Jacquard net relief
Jacquard Module 1x1 Technique_Float with Cast-off
Create and set-up order with several knitting programs
Save the order with several knitting programs
Manage folders and patterns
Front fully fashion without comb
Create and set-up an order with a knitting program
Additional Information with Fully Fashion - without Comb
Threading-up and Positioning Yarn Carriers with patterns without comb
Picking-up after Pressing-off Function
Setting: Distance of the yarn carrier at the fabric selvedge
Applications + gore technique without comb
Create and set-up an order with a knitting program
Maintenance of the knitting machine
Minimize wear
Cleaning the Knitting Machine
Cleaning the touch screen
Vacuuming off knitting machine
Cleaning needle bed
Cleaning the collecting clamp unit
Cleaning the active thread clamp
Cleaning the permanent brakes
Cleaning the friction feed wheel
Vacuuming the Interior on the Right Side
Cleaning the racking light barrier
Thoroughly cleaning needle bed
Clean the knitting systems
Lubricate the Knitting Machine
Lubrication interval
Lubricants
Set lubrication interval for needle bed
Oil needle bed
Oil jack bed
Oiling yarn carrier rods
Check the oil collecting container
Oiling carriage guide bar
Greasing butts of the coupling parts and intermediate sliders
Greasing the control sliders
Greasing the drive chain of the belt take-down
Greasing racking device
Confirm the lubrication process
Grease needle bed supports
Service
Export / import machine data
Software installation
With BMS 52
Install the Software - Direct Installation
Direct Installation: Installation and Configuration
Reference Runs
Updating Software - Indirect Installation
Update Languages
Software Download
Miscellaneous
Further system settings
Display
Time and Language
User
Set PINs
Set Permissions
Set Shift Plan
Data Management
Report Data
Run-time Data
Economic production and the influencing factors